Friday 31 October 2014

Monitoring Energy usage with the LED Pulse Sensor from Crucible Technologies

With winter coming, and all the energy scares in the news, I was keen to start monitoring the power we were using. I had always intended designing my own system with the LED Pulse Sensor and the Raspberry Pi, but had never got round to it. So I thought I'd quickly rig up soemthing using the Meter Logger from Crucible Technologies. Took me around half an hour to set it all up.

Sunday 26 October 2014

Switching appliances ON and OFF remotely by e-mail with the Raspberry Pi and Mains Switch Widget #2

Switching appliances ON and OFF using e-mails. This part of this multi-part post looks at logging in and reading e-mails from a gmail account and using the subject field to switch an appliance ON and OFF.

Sunday 12 October 2014

Switching appliances ON and OFF remotely by e-mail with the Raspberry Pi and Mains Switch Widget #1

Having designed the Mains Switch Widget, my next challenge was to turn appliances ON and OFF from outside the house. I investigated Twitter and texts as a means of doing this but finally settled on using e-mails to control the appliances. This multi part post outlines the various steps along the way.

Tuesday 7 October 2014

Electrical Safety in product design



If your product is going to be powered by batteries or use an external plug top supply, then this subject is not a priority for you. However a well rounded electronics engineer should have an appreciation of electrical safety in a product. If your product is going to use mains voltage, then it is vital that you have a good understanding of this.